Accessories:
Use manual x 1
Screw x 2
Wire Nuts x 3
Installation:
1.Pull the SUPPLY WIRES 1&6 and the HOUSE GROUND WIRE 7 out from the OUTLET BOX 1 and attach the MOUNTING BRACKET 2to the OUTLET BOX using the slotted holes on the MOUNTING BRACKET 2 and the MOUNTING SCREWS 3 provided
2.Thread the FIXTURE SCREWS 4 into the appropriate threaded holes of the MOUNTING BRACKET 2
3. Connect the power supply wires to the fixture lead wires by connecting the BLACK FIXTURE WIRE ⑨9to the BLACK SUPPLY WIRE 6, and the WHITE FIXTURE WIRE 8 to the WHITE SUPPLY WIRE 5 using WIRE CONNECTOR 11. Connect the fixture GROUND WIRE 7 to the SUPPLY GROUND WIRE 10 by fixed on the MOUNTING BRACKET 2
4.Carefully tuck all wiring back into the OUTLET BOX. Raise the fixture pan 12 to mounting surface allowing for mounting screws 12 to protrude through key slots. Rotate the FIXTURE PAN 12 clockwise until screws are in narrow part of key slots, and tighten securely
5.Final assembly- Secure the lens 13 and ring 14 to fixture pan 12 using three cap nuts 15